Description
All the parts you need to build your own remote control for Raymarine autopilots.
The kit includes:
- One connector, AKL 101-03, 3-pin, 5.08 mm
- One RXB6 receiver 433 MHz
- One Arduino ProMicro board, 5V
- One 7805 regulator
- One 74LS07 DIP 14 integrated circuit
- One 5.1V Zener diode (0.5W)
- One red 3mm LED
- Two 10 KOhm resistors, 1/4W
- One 68 KOhm resistor, 1/4W
- One 27 KOhm resistor, 1/4W
- One 270 Ohm resistor, 1/4W
- One 433 MHz antenna
- One 433 MHz 6-button remote control
- Three 2.8mm Faston connectors
- One PCB for mounting all the components
The kit does not include:
- Box
- USB cable (USB-C)
- Cables
Compatible with the following autopilots:
- Wireless remote control compatible with all Raymarine SeaTalk and Evolution autopilots, except SportPilot and SportPilot Plus wheel pilots.
- For those with a SeaTalk 1 three-pin connector, the connection is direct with the supplied Faston connectors.
You can follow the instructions in our YouTube video for assembly and programming.
You can also use the custom firmware we’ve developed, and a user manual for that firmware is available here.
